Suction Hose Gvac 38mm 7.5m With Cuffs

Description

This 7.5 m suction hose is a replacement vacuum hose for Polivac carpet extractors, supplied with 38 mm cuffs at both ends. The orange and black hose is flexible enough to work around furniture and up stairs, yet durable and leak resistant for daily commercial use. Part number PPR108.

Key Features

• 7.5 m length for wide working coverage from a single machine position
• 38 mm diameter with 38 mm cuffs fitted at both ends
• Flexible construction that bends around furniture and stair edges
• Leak resistant seal at each cuff for consistent recovery airflow
• Durable orange and black outer suited to commercial workloads
• Suits carpet wands, upholstery tools and stair detailing tools

Benefits

• Restores full suction to an extractor running a split or perished hose
• Reduces machine repositioning on larger jobs, saving time per room
• Secure cuffs prevent air leaks that rob recovery performance and leave carpet wetter
• High visibility orange helps keep the hose seen on site and reduces trip risk
• One hose covers carpet, stairs, upholstery and vehicle interiors

Safety Information

• Switch off and isolate the machine before fitting or removing the vacuum hose
• Check both cuffs are fully seated before starting to avoid sudden disconnection
• Route the hose clear of walkways, doorways and stair edges to prevent trips
• Inspect for splits, kinks and blockages before each job and replace if damaged
• Flush with clean water after use and allow to dry before storing

FAQs

What size cuffs does a carpet extractor suction hose use?
Most commercial extractors use a 38 mm fitting. Cuffs are fitted at both ends, one for the machine inlet and one for the wand or tool. Measure your existing cuff before ordering.

How long should a vacuum hose be for carpet cleaning?
A 7.5 metre hose covers most rooms without moving the machine. Longer hoses add reach but also airflow resistance.

Why is my carpet extractor losing suction?
Usually a split hose, a loose cuff, a blockage or a full recovery tank. Check the hose along its full length before investigating the machine.

Can a vacuum hose be used for upholstery cleaning?
Yes. A 38 mm hose connects to upholstery and detail tools as well as full size wands.

How do you clean and store a carpet extractor hose?
Flush with clean water after each job, allow to dry, then coil loosely away from direct sunlight.

Downloads