Carpet Solution Hose 7.5m
$214.50
99 in stock
Description
This 7.5 m solution hose is a genuine replacement part for the Polivac Predator carpet extractor, part number PPR110. It carries pressurised cleaning solution from the machine’s pump through to the wand or detail tool, and its 7.5 metre length matches a standard vacuum hose so both lines run together to the working end.
Key Features
- 7.5 m length, matched to standard carpet extractor vacuum hose reach
- Direct replacement for Polivac Predator, part number PPR110
- Built to handle pressurised, heated cleaning solution
- Flexible enough to run around furniture, doorways and stairs
- Suits carpet wands, upholstery tools and stair detailing tools
Benefits
- Restores full spray pressure to a machine running a leaking or perished line
- Stops solution loss that wastes chemical and leaves patchy cleaning results
- Matched length keeps the solution hose and vacuum hose paired and tidy on site
- Keeps a working extractor in service rather than off the job waiting on repair
- Straightforward swap using existing machine fittings
Safety Information
- Switch off the machine and release all system pressure before fitting or removing the hose
- Allow the system to cool before handling, as solution may be heated
- Check fittings are fully tightened before pressurising to prevent a hose whipping loose
- Never substitute unrated tubing such as garden hose for a solution line
- Inspect for bulging, cracking or leaks before each job and replace if damaged
FAQs
What does a solution hose do on a carpet extractor?
It carries pressurised cleaning solution from the pump to the wand or detail tool, working alongside the vacuum hose that recovers soiled water.
How do I know if my solution hose needs replacing?
Look for dripping along the hose or at the fittings, weak or uneven spray at the wand, and a pump working harder than usual.
Can I use a garden hose as a carpet extractor solution line?
No. A solution hose is built for the pressure and hot water output of an extractor pump. Unrated tubing can burst and cause scalding.
How long should a carpet extractor solution hose be?
7.5 metres is standard, matching typical vacuum hose reach so neither line pulls tight before the other.
How should carpet extractor hoses be maintained?
Flush with clean water after using chemicals, release pressure before disconnecting, and coil loosely for storage.
